世界足球俱乐部杯

ISL6244CR Datasheet

  • ISL6244CR

  • Multi-Phase PWM Controller

  • 440.00KB

  • 25页

  • INTERSIL   INTERSIL

扫码查看芯片数据手册

上传产品规格书

PDF预览

ISL6244
Data Sheet
December 28, 2004
FN9106.3
Multi-Phase PWM Controller
The ISL6244 provides core-voltage regulation by driving 2 to
4 interleaved synchronous-rectified buck-converter channels
in parallel. Interleaving the channel timing results in
increased ripple frequency which reduces input and output
ripple currents. The reduction in ripple results in lower
component cost, reduced dissipation, and a smaller
implementation area.
The ISL6244 uses cost and space-saving r
DS(ON)
sensing
for channel current balance, active voltage positioning, and
over-current protection. Output voltage is monitored by an
internal differential remote sense amplifier. A high-bandwidth
error amplifier drives the output voltage to match the
programmed 5-bit DAC reference voltage. The resulting
compensation signal guides the creation of pulse width
modulated (PWM) signals to control companion Intersil
MOSFET drivers. The OFS pin allows direct offset of the
DAC voltage from 0V to 100mV using a single external
resistor. The entire system is trimmed to ensure a system
accuracy of 卤 1%.
Outstanding features of this controller IC include
Dynamic VID
TM
technology allowing seamless on-the-fly VID
changing without the need of any external components.
Battery 鈥渇eed-forward鈥?is provided to allow for traditional
control schemes over total input voltage variation. Output
voltage 鈥渄roop鈥?or active voltage positioning is optional.
When employed, it allows the reduction in size and cost of
the output capacitors required to support load transients. A
threshold-sensitive enable input allows the use of an
external resistor divider for start-up coordination with Intersil
MOSFET drivers or any other devices powered from a
separate supply.
Superior over-voltage protection is achieved by gating on the
lower MOSFET of all phases to reduce the output voltage.
Under-voltage conditions are detected, but PWM operation
is not disrupted. Over-current conditions cause a hiccup-
mode response as the controller repeatedly tries to restart.
After a set number of failed startup attempts, the controller
latches off. A power good logic signal indicates when the
converter output is between the UV and OV thresholds.
Features
鈥?Multi-Phase Power Conversion
- 2, 3 or 4 Phase Operation
鈥?Active Channel Current Balancing
鈥?Precision r
DS(ON)
Current Sharing
- Lossless
- Low Cost
鈥?Precision CORE Voltage Regulation
- Differential Remote Output Voltage Sensing
- Programmable Reference Offset
- 卤1% System Accuracy
鈥?Microprocessor Voltage Identification Input
- 5-Bit VID Input
- 0.800V to 1.550V in 25mV Steps
- Dynamic VID Technology
鈥?Programmable Droop Voltage
鈥?Excellent Dynamic Response
- Combined Input Voltage Feed-Forward and Pulse-by-
Pulse Average Current Mode
鈥?Over Current Protection
鈥?Digital Soft Start
鈥?Threshold Sensitive Enable Input
鈥?High Ripple Frequency (160kHz to 4MHz)
鈥?QFN Package:
- Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat
No Leads - Package Outline
- Near Chip Scale Package footprint, which improves PCB
efficiency and has a thinner profile
鈥?Pb-Free Available (RoHS Compliant)
Applications
鈥?AMD Hammer Family Processor Voltage Regulator
鈥?Low Output Voltage, High Current DC-DC Converters
鈥?Voltage Regulator Modules
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright 漏 Intersil Americas Inc. 2004 All Rights Reserved. Dynamic VID鈩?is a trademark of Intersil Americas Inc.
All other trademarks mentioned are the property of their respective owners.

ISL6244CR 产品属性

  • 60

  • 集成电路 (IC)

  • PMIC - 稳压器 - DC DC 切换控制器

  • -

  • 电流/电压模式

  • 4

  • 4MHz

  • 75%

  • 4.75 V ~ 5.25 V

  • 0°C ~ 70°C

  • 32-VFQFN 裸露焊盘

  • 管件

ISL6244CR相关型号PDF文件下载

您可能感兴趣的PDF文件资料

热门IC型号推荐

扫码下载APP,
 一键连接广大的电子世界。

在线人工客服

买家服务:
卖家服务:
技术客服:

0571-85317607

网站技术支持

13606545031

客服在线时间周一至周五
 9:00-17:30

关注官方微信号,
第一时间获取资讯。

建议反馈
返回顶部

建议反馈

联系人:

联系方式:

按住滑块,拖拽到最右边
>>
感谢您向阿库提出的宝贵意见,您的参与是维库提升服务的动力!意见一经采纳,将有感恩红包奉上哦!