HT48R10A-1/HT48C10-1
I/O Type 8-Bit MCU
Technical Document
路
Tools Information
路
FAQs
路
Application Note
-
-
-
-
-
HA0003E Communicating between the HT48 & HT46 Series MCUs and the HT93LC46 EEPROM
HA0004E HT48 & HT46 MCU UART Software Implementation Method
HA0013E HT48 & HT46 LCM Interface Design
HA0021E Using the I/O Ports on the HT48 MCU Series
HA0055E 2^12 Decoder (8+4 - Corresponds to HT12E)
Features
路
Operating voltage:
路
64麓8 data memory RAM
路
Buzzer driving pair and PFD supported
路
HALT function and wake-up feature reduce power
f
SYS
=4MHz: 2.2V~5.5V
f
SYS
=8MHz: 3.3V~5.5V
路
Low voltage reset function
路
21 bidirectional I/O lines (max.)
路
1 interrupt input shared with an I/O line
路
8-bit programmable timer/event counter with over-
consumption
路
Up to 0.5ms instruction cycle with 8MHz system clock
at V
DD
=5V
路
All instructions in one or two machine cycles
路
14-bit table read instruction
路
4-level subroutine nesting
路
Bit manipulation instruction
路
63 powerful instructions
路
24-pin SKDIP/SOP package
flow interrupt and 8-stage prescaler
路
On-chip external crystal, RC oscillator and internal
RC oscillator
路
32768Hz crystal oscillator for timing purposes only
路
Watchdog Timer
路
1024麓14 program memory ROM
General Description
The HT48R10A-1/HT48C10-1 are 8-bit high perfor-
mance, RISC architecture microcontroller devices spe-
cifically designed for multiple I/O control product
applications. The mask version HT48C10-1 is fully pin
and functionally compatible with the OTP version
HT48R10A-1 device.
The advantages of low power consumption, I/O flexibil-
ity, timer functions, oscillator options, HALT and
wake-up functions, watchdog timer, buzzer driver, as
well as low cost, enhance the versatility of these devices
to suit a wide range of application possibilities such as
industrial control, consumer products, subsystem con-
trollers, etc.
Rev. 1.90
1
November 4, 2005